Tree: Ralide_ with bars designed to fit the Haflinger. ~@Gullet: 6 3/4inch Width ~@Seat: grainout padded ~@Cantle Height: 4inch ~@Trim: Silver conchos ~@Finish: Brown ~@Warranty: 5 years~@SPECIAL FEATURES: Saddle designed to fit the Haflinger. This saddle also works well for mutton withered horses.

Ride in comfort and style with this colorful saddle from Big Horn. It features a soft suede-covered front_ seat_ and jockeys. It's built on a Ralide 13inch barrel-front tree with Quarter horse bars and contains 7/8 position stainless steel rigging. It also features a Codura nylon skirt_ housings_ and fenders_ and leather conchos. ~@~@~@Tree: Ralide 13inch barrel front_ Quarter horse bars_ 6 3/4inch ~@Rigging: 7/8 position single front stainless steel dee ~@Seat: 16inch suede covered padded seat_ jockeys_ and fronts ~@Cantle: 4inch ~@Trim: Cordura nylon skirt_ housings_ and fenders; leather conchos_ suede front_ cantle binding_ and horn ~@Stirrups: Ralide with laced suede cushioned foot pad ~@Fenders: 18inch x 8inch_ 2inch leather reinforced nylon stirrup straps with roller buckles ~@Finish: Black suede and Cordura accented with black binding ~@Weight: Approximately 15 lbs

Tree Size:Medium/QHBars Close~@~@In general the Semi QH Bar will fit the smaller build horse. The Quarter Horse bar or medium tree will fit the average build horse under 1050-1100 lbs. The FQHB (Full Quarter Horse Bar) or Wide Tree should fit the large build horses over 1050 lbs. The Extra Wide or Haflinger should fit the quite round_ large mutton wither horse over 1300 lbs. The Draft Horse should fit a horse that is over 1500lbs. Read more. ~@Tree Material:Roper Ralide Close~@~@Tree traits: Wood Rawhide/Bullhide Covered - very strong and heavy. Wood Fiberglass Covered - very strong and heavy. Ralide - lighter weight_ economical and not same strength as a wood tree. Flex - Lightweight_ can be expensive_ comfortable and not designed for the rigors of ranch/farm work. Read more. ~@Seat Size:15inch Close~@~@A general guide for western saddle seat sizes: Women:~@Saddle Seat Size (Western) 15inch Weight 105 to 150 Pant Size 6 to 10 ~@Saddle Seat Size (Western) 16inch Weight 150 to 170 Pant Size 10 to 14 ~@Saddle Seat Size (Western) 17inch Weight 170 to 210 Pant Size 16 to 20 ~@Saddle Seat Size (Western) 18inch Weight 210 + Pant Size 22 + ~@Men:~@Saddle Seat Size (Western) 15inch Weight 130 to 160 Waste Size 29 - 34 inches ~@Saddle Seat Size (Western) 16inch Weight 160 to 190 Waste Size 31 - 36 inches ~@Saddle Seat Size (Western) 17inch Weight 190 to 230 Waste Size 38 - 42 inches ~@Saddle Seat Size (Western) 18inch Weight 230 + Waste Size 42 + inches ~@~@Read more. ~@~@Seat Material:Suede - Quilted Close~@~@Grainout or Leather: This seat is easy to maintain_ is smooth and wipes clean and repels water. ~@Roughout or Suede: This seat has the neat suede look_ is softer to the touch and provides a more secure fit.~@~@Padding: Most trail_ show_ barrel_ roping_ reining_ endurance and cutting saddles have padded seats_ though many cutting saddles have very little to no padding. Many ranch saddles and some cutting saddles have no padding. ~@~@Cantle:3inch With Cheyenne Roll Close~@~@The cantle is the upright part at the back of the seat of a western saddle. The cantle provides support for your lower body and also comfort while riding. Roping saddles usually have a lower cantle (3 to 3.5inch) making it easier to lift your leg over the saddle when dismounting. Trail and reining saddles usually have a medium height cantle around 4-5inchinch and Barrel Racing and Ranch saddles often have higher 5inch cantles. ~@Swell:13inch Close~@~@The swell is the widest distance from the outside ends of the fork - it is the part of the saddle that the horn is on top of. A wider swell will give you more leverage and security where the narrow swell will give you more room to maneuver your legs. ~@Horn:Roping -Wrapped Close~@~@Different riding disciplines use horns differently. A trail saddle usually has a horn easy to grab hold of where a roping saddle has a reinforced horn that is thicker and with a larger cap. A show saddle usually has a low ornate horn. Read more. ~@Rigging:Full Rigged Close~@~@There are two main aspects to rigging: position and hardware ~@Position: Can be Full_ 7/8_ 3/4 or Center Fire. The 3-way rigging gives the option for Full_ 7/8 or 3/4. Click on the link below for more information on rigging.~@~@Hardware: This determines the strength (and also bulk) of the rigging. Often Rope and Ranch saddles are double rigged directly to the tree_ where most other saddles use in-skirt rigging. Read more. ~@~@Hardware:Fully tooled_ with reinforced leather.~@~@Skirts:25.5inch Close~@~@Round or Square: Many short backed horses require shorter skirting. The round skirts do not extend down the same that a square skirt does and provides relief for short backed horses. ~@Length: Most saddles have skirt lengths ranging from 24.5inch to 28inch This is a general skirt length given as a 14inch seat will have a longer skirt than the same model with a 17inch seat.~@~@Close Contact: Some saddles have butterfly type skirting that is cut-out a bit behind the fenders. This allows the rider to have closer contact with the horse being able to give better cues. ~@~@Stirrups:Bell - Ropers Close~@~@The shape of stirrups are usually bell_ oxbow (round) or square (aluminum trail/endurance). They also can be wrapped in leather or the stronger rawhide. Some saddles come with the option of having oversized stirrups for the larger boot. ~@Saddle Weight:About 32 Lbs Close~@~@Most leather saddles weigh between 25 lbs. and 42 lbs. Often the tree determines much of the saddle weight along with the rigging used. If the saddle has a back cinch and leather tie straps and off-billets the saddle weight will be several pounds higher. ~@Features:Well maintained with 3 piece back cinch and a 36inch front cinch..

15inch 16inch Big Horn Saddle FQHB Cordura~@~@Tree: Fiberglass covered wood tree_ Full 7inch quarter horse bars. 13inch barrel front. ~@Seat: 15inch 16inch. ~@Rigging: 7/8 position single front stainless steel dee. ~@Cantle: 4inch with 1 1/2inch leather cantle binding. ~@Trim: Cordura nylon skirts_ housings and fenders. Leather conchos. Leather front and cantle binding. Padded leather seat. ~@Fenders: 19inch x 8inch_ 2inch leather reinforced nylon stirrup straps with Blevins buckles. ~@Finish: Brown or black. ~@Stirrups: Ralide with laced leather foot pad. ~@Weight: Approximately 18lbs

Tree: Fiberglass covered wood tree_ semi-quarter horse bars. ~@Cantle: 3inch with 1 1/2inch Cheyenne roll. ~@Rigging: 7/8 position single front rigging_ stainless steel dees. ~@Fenders: 19inch X 8inch_ 2 1/2inch leather reinforced nylon stirrup straps with Blevins buckles. ~@Skirts: 25inch X 12inch_ square_ fleece lined. ~@Seat: Roughout_ Padded. ~@Stirrups: Ralide with laced leather foot pad. ~@Trim: Smooth leather front and jockeys_ Cordura Nylon skirts_ fenders and housings_ leather conchos_ breast collar dees_ dees for attaching saddle strings. ~@Weight: Approximately 24lbs.

Tree: Fiberglass covered wood tree_ full 7inch quarter horse bars_ 13inch barrel front. ~@Cantle: 3inch with 1 1/2inch Cheyenne roll. ~@Rigging: 7/8 position single front rigging_ heavy stainless steel dees. ~@Grain-out padded. ~@Fenders: 19inch X 8inch_ 2 1/2inch leather reinforced nylon stirrup straps with Blevins buckles. ~@Skirts: 25inch X 12inch_ square_ fleece lined. ~@Stirrups: Ralide with laced leather foot pad. ~@Trim: Smooth leather front and jockeys_ Cordura Nylon skirts_ fenders and housings_ leather conchos_ breast collar dees_ dees for attaching saddle strings. ~@Weight: Approximately 20lbs.

Other sizes available - call for availability and pricing.~@~@~@Tree: Fiberglass covered wood tree_ wide Endurance style. ~@Cantle: 4inch ~@Stirrups: Ralide with leather foot pads. ~@Rigging: 7/8 position stainless steel dees. ~@Seat: 16inch Grainout padded. ~@Finish: Brown ~@Skirts: 25inch x 10inch Round_ fleece lined. ~@Fenders: 17 1/2inch x 7 1/2inch_ 2 1/2inch leather reinforced nylon stirrup straps with stainless steel buckles. ~@Weight: Approx 18lbs

Tree: Fiberglass covered wood tree_ 12inch endurance style_ semi-quarter horse bars. ~@Seat: 15inch_ 16inch ~@Rigging: Western style inchCenter Fire_inch solid brass ring and dees. ~@Cantle: 4inch with 1 1/2inch Cheyenne roll cantle binding. ~@Trim: Smooth leather jockeys_ leather conchos_ Cordura Nylon skirts and rear housings_ four attached eye loops_ six clips and dees_ breast collar dees_ dee for attaching back strap and crupper. ~@Skirts: 15inch is 25inch x 14inch 16inch is 26inch x 10.5inch ~@Fenders: 18inch x 7 1/inch nylon_ 2inch leather reinforced nylon stirrup straps with Blevins buckles. ~@Stirrups: Ralide with laced leather foot pad. ~@Finish: Black ~@Weight: Approximately 18lbs

As a company Big Horn does an excellent job at making sure that every size and shape or horse has a saddle to fit it. This new model is called a Flat Top-Line saddle_ making it perfect for any horse with just that---a flat top-line. If your horse or mule has a straight_ flat back with less-defined withers_ this is the saddle for you. It's built on a fiberglass-covered wood tree and fashioned out of Big Horn's quality Cordura. It also features swept-back swells_ brass hardware_ and a grain-out_ padded seat. ~@~@Specifications: ~@Tree: Fiberglass-covered wood with flat top-line bars_ swept-back swells ~@Seat: Grain-out_ padded ~@Cantle: 4inch ~@Gullet: 6 3/4inch ~@Rigging: 7/8inch solid brass double conventional rigging. Brass crupper ring_ breeching_ and breast collar dees ~@Trim: Brass hardware and saddle strings ~@Finish: Show brown ~@Weight: 22 lbs